DTM10 Proximity Distributed Transmitter Monitor PVTVM

Измерительные приборы

Electrical

Power Supply:

22-30VDC,            150mA.

Galvanic isolation

Frequency Response (-3dB):

Nominal frequency:     4 ~ 3.0KHz

Low frequency:   0.5 ~ 100Hz

Proximity probe Interface:

Sensitivity:

5mm and 8mm probe:   8 mV/um (200 mv/mil)

11mm probe:              4 mv/um (100 mv/mil)

25mm probe:              2mv/um (50 mv/mil)

Buffered Output:

Original, un-filtered signal

Impedance:                            150Ω

Maximum cable distance:   300m (1000ft)

Sensitivity:                     same as the sensor

Local BNC connection and terminal block

S0 and S1 options:     Source, Non isolated

S2 and S3 options:  

 Passive, Galvanic isolation, 1000VDC

Power supply range: 22-30VDC

4-20mA Output:

Dual 4-20mA, sourced (loop power not required)

Maximum load resistance:   380Ω

Alarm Setup:

0 ~ 100% FS.

Accuracy:    ±0.1%.

Delay:          1~60s, according to 1 second increase, default is 3s. Speed monitor without delay.

Relays:

Seal:             Epoxy

Capacity:     0.2A/240VAC, 0.4A/110VAC or

2.0A/24VDC, resistive load

Relay type: SPTD

Isolation:      1000VDC

LED Machine Condition Indicator:

OK:      System OK indication

ALT:    Vibration over ALERT level

DNG:   Vibration over DANGER level

BYP:    System in BYPASS

TRX:    Digital Transmission Active